| Availability: | |
|---|---|
| Quantity: | |
Black is often ordered as a colour and read as a claim about static protection. The two are separate specifications. The shade comes from a carbon black masterbatch; static behaviour comes from an additive or conductive grade and is measured separately. A dark liner with no declared surface resistance is simply a dark liner. We treat the colour as a controlled material with its own tests.
There are good reasons to choose it. A black cavity contrasts with light coloured, plated, or machined parts, so a missing or wrongly seated component is obvious. It cuts glare under bright line lighting, hides the handling marks a white foam shows after a week, and blocks light from adhesives, coatings, or sensors that should not be exposed during storage.
Consistency is the first test. Colour is used across a fleet as an identification code, so a batch that drifts grey or brown quietly breaks that system. We agree a signed colour standard and an acceptable shade band, record the masterbatch lot with each production run, and check that different densities and thicknesses still read as the same black under the plant's actual lighting.
Contact safety matters more than appearance. Pigment can transfer onto pale paint, plated trim, or textiles when a liner is pressed, warmed, or cleaned with an aggressive agent. Sample liners are held against the real surface under load and heat, rubbed, washed, and inspected for marking. Where a risk remains, a film facing or a thin barrier ply isolates the foam without changing the cavity.
A dark surface changes daily inspection habits. It shows white dust, fibres, and foam crumbs clearly, but it makes a light scratch look worse than it is. Cut edges are deburred and sealed so the liner does not shed, and the agreed cleaning agent is checked for bleeding or a bloom on the surface before the pack is released for repeated use.
If static control is in fact required, it is specified separately. The target surface resistance, the test method, and the conditions of measurement are stated on the drawing, along with how the value holds over time and humidity. That grade then sits inside a wider controlled packaging chain with labelled bags and grounding. Colour alone never stands in for any of it.
To specify a black liner, send the part surfaces and their colours, any light sensitivity, the marking limits for pigment transfer, cleaning agents and temperature range, the identification colour code in use, and whether static control is needed with its target value. We return a signed colour sample, contact and rub test records, static measurements if applicable, and trial liners for a fit check.