+86-512-55391251 / +86-18901563989             zjgfhwm@zjgfenghui.cn
CNC Engraved EPE Liners With Finger Access And Guided Part Retrieval
You are here: Home » Products » Packaging Lining » EPE » CNC Engraved EPE Liners With Finger Access And Guided Part Retrieval
EPE foam

loading

EPE foam EPE foam
EPE foam EPE foam
EPE foam EPE foam
EPE foam EPE foam
EPE foam EPE foam
EPE foam EPE foam

CNC Engraved EPE Liners With Finger Access And Guided Part Retrieval

Availability:
Quantity:
CNC engraved EPE liners designed around the hand as much as the part: finger notches, lead in angles, one way placement, and reinforced cavity lips that survive repeated gloved retrieval.
Product Description

Most liner specifications describe how a part is held and say nothing about how a person gets it out. At the line an operator wears gloves and repeats the lift hundreds of times a shift. A cavity that grips the part too tightly forces a pry or a twist, which marks finished surfaces and tears the foam. Retrieval deserves its own geometry.

We start with the handling drawing: part orientation, grip points, reach direction, and glove size. CNC engraving then cuts finger notches at both sides of the cavity, lead in angles at the mouth, and stepped relief where a boss or connector would otherwise snag. Because material is removed rather than formed, those features are cut in the same setup as the pocket itself.

Placement is made one way only. An asymmetric locating pad, a small anti reverse boss, and a direction mark stop a component being dropped in backwards, while the open face of the cavity always points towards the aisle. Numbered cells follow the picking order, so the hand moves in one direction through the box instead of searching for the next part. Every lift follows the same path.

Fit leaves room for the hand. Support faces carry the part; everything else is relieved. EPE creeps under sustained compression, so a pocket tight on day one can loosen after weeks in a stacked crate or bind when dust changes the surface. Finger notches are cut without breaking through a load bearing wall, and their depth is checked against a real part.

The cavity mouth takes most of the wear. Repeated gloved retrieval abrades the lip, and laminated EPE can delaminate or fuzz at a cut edge. Rounded entries, a film facing, or a replaceable wear strip keep the edge intact. After washing we inspect the same points, because a torn notch is where an operator starts levering a part out.

Verification uses the real handling conditions. Sample liners are fitted with production parts and lifted repeatedly by gloved operators, then run through vibration and a drop sequence and refitted. The record notes whether any part needed prying, whether orientation stayed obvious, and whether the notch edges still look sound. A smooth lift on the first article is the acceptance criterion, not a dimension alone.

To design that geometry, send the part data with permitted grip points, the glove constraints, the reach direction and takt at the line, crate inner dimensions, cleaning agents, temperature range, expected cycles, and the number of variants sharing the box. We return a toolpath drawing showing every finger notch and lead in angle, sample liners, and a retrieval trial record with the first article.

Product data parameters
Product Name
Dust-Proof Canvas
Oxford Cloth Bag
Material
100% Cotton Canvas
600D Oxford Cloth
Feature
Eco-Friendly
Reusable
Dust-Proof
Scratch-Resistant
Application
Hardware Parts
Electronic Components
Irregular Accessories
MOQ
500 Pcs (Customizable)
Origin
Zhangjiagang
Jiangsu
China
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button
Previous: 
Next: 

Quick Links

Product Category

Contact Us

   +86-512-55391251 / +86-18901563989
  zjgfhwm@zjgfenghui.cn
   No. 5 Zhaofeng East Ring Road, Leyu Town, Zhangjiagang City, Jiangsu Province
Copyright © 2023 Zhangjiagang Fenghui logistics equipment Co., Ltd. Supported by Leadong. Sitemap. Privacy Policy.