| Availability: | |
|---|---|
| Quantity: | |
Standard sized components do not automatically point to a standard box. The parts may be uniform, but every plant has its own pallet, conveyor width, stack height, picking direction, and label system. What a customised HP crate actually changes is that set of interfaces, not its overall shape. Starting from a proven crate platform keeps the geometry that has already passed stacking and transit tests.
We therefore issue a configuration list with the quotation. It separates what may be selected from what is fixed. Outer footprint, stack locator geometry, and base rib layout stay frozen because the fleet, the racking, and the automated handling equipment were built around them. Everything else is offered as a named option with a code, so a repeat order can be placed without restating the whole specification.
The visible options are the ones operators notice first: grip openings on one or two faces, lid type and opening direction, hinge and latch style, a flat zone for a wash resistant barcode label, moulded part numbers, and colour. All are cut into the same tool with inserts or secondary operations, which keeps a small batch of special crates economically possible.
Internal options do the rest. Layer pads, slotted dividers, and shaped liners set the count and the position of parts inside a fixed envelope, and their clearance is checked against the same inner dimension. A variant that changes only the liner leaves the crate approval untouched; a variant that changes the wall, the base, or the stack locator does not.
Material options are declared separately from geometry. An anti static grade, a low temperature impact modified PP, or a colour batch is chosen against the route and recorded on the drawing. Virgin resin is used for visible and structural parts, and any change of grade carries its own test evidence rather than inheriting the approval of the original crate.
Every change is tied to a retest. A new handle or lid means a drop sequence and an opening cycle check; a new liner means a fit, vibration, and wash trial; a new material or stack geometry means static and dynamic load testing; a new label zone means a barcode read after washing. The change note, tool revision, and batch identifiers are stored together, so old and new crates circulating in one loop can be told apart.
To configure a crate for your plant, send the handling and storage interface sheet, the part list with quantity per box, stack height, label format, cleaning agents, temperature range, and expected cycles. We return a coded option list, a change impact table showing which tests each option triggers, and a sample crate for a line trial before the revision is released.