+86-512-55391251 / +86-18901563989             zjgfhwm@zjgfenghui.cn
EPP Containers That Protect Calibration, Not Just Appearance
You are here: Home » Products » Packaging Lining » EPP » EPP Containers That Protect Calibration, Not Just Appearance
EPP lining

loading

EPP lining EPP lining
EPP lining EPP lining
EPP lining EPP lining
EPP lining EPP lining
EPP lining EPP lining
EPP lining EPP lining

EPP Containers That Protect Calibration, Not Just Appearance

Availability:
Quantity:
EPP containers engineered for the acceptance criteria of medical devices: shock kept below calibration drift thresholds, temperature held in range, clean surfaces, and a validation record attached to every shipment.
Product Description

A precision medical device is not accepted because it looks undamaged. It is accepted because it still measures what it is supposed to measure, still aligns where it should align, and still arrives within the conditions its approval assumes. That shifts the packaging target: a container for diagnostics, optical modules, or surgical instruments is protecting calibration and clinical usability, not merely preventing dents.

The threat is often small and repeated. A sensor array or an optical head can survive a journey with no visible mark yet lose alignment through hundreds of low-level shocks, returning a reading that has drifted out of tolerance. High-density expanded polypropylene answers with shape-memory recovery—cavities that keep their grip through repeated impacts instead of slowly opening up—so acceleration peaks stay below the thresholds a device's own validation permits. Support lands on structural housings, never on a calibrated face or a polished optical surface.

Temperature is the second acceptance condition. EPP remains stable from deep cold stores to hot loading docks, and its closed-cell structure absorbs virtually no water, so condensation and humidity swings do not reach the instrument. Its insulating behaviour buffers short excursions during handovers, and the container leaves room for a data logger so the shipped temperature profile is recorded rather than assumed.

Cleanliness has to coexist with that protection. Moulded EPP surfaces are smooth, low-linting, and wipeable with approved agents, and the closed-cell foam does not wick fluids into its body. Where a sterile barrier is required, the container works outside it—holding the sealed pouch or tray in place without compromising the barrier itself. Colour coding and clear labelling keep device families separate in a busy receiving area.

Documentation is what makes the packaging usable in a regulated environment. A validated transport file states the drop heights, vibration profiles, and temperature bands the container was tested against, ties each foam batch to a material declaration, and identifies the cavity revision by number. When a quality team reviews a shipment months later, the evidence is already on file.

Reuse is managed, not improvised. Returnable containers follow a written cleaning procedure, are inspected for permanent cavity compression and surface wear, and are retired against defined criteria rather than on a calendar. At end of life the polypropylene is fully recyclable.

To specify one, provide the device's dimensions and weight, its calibration tolerance, the required temperature range, and the markets it will enter. A complete response includes the cavity layout, the shock and thermal test plan, and the validation package—proof that the device arrived ready to use, not just intact.

Product data parameters
Material
Ethylene-Vinyl Acetate (EVA) foam
closed-cell
cross-linked
VA Content
5% – 40% by weight
Density
30 – 300 kg/m³
Hardness
Shore A 20 – 90 (or Shore C 10 – 90)
Service Temperature
−40 °C ~ +80 °C
Tensile Strength
2 – 20 MPa
Elongation at Break
100% – 600% (up to 800%)
Compression Set
≤ 35% (22h @ 70 °C)
Water Absorption
< 1% by volume
Flame Retardant
UL 94 HB / V-0 (optional)
Product Catalogue
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button
Previous: 
Next: 

Quick Links

Product Category

Contact Us

   +86-512-55391251 / +86-18901563989
  zjgfhwm@zjgfenghui.cn
   No. 5 Zhaofeng East Ring Road, Leyu Town, Zhangjiagang City, Jiangsu Province
Copyright © 2023 Zhangjiagang Fenghui logistics equipment Co., Ltd. Supported by Leadong. Sitemap. Privacy Policy.