+86-512-55391251 / +86-18901563989             zjgfhwm@zjgfenghui.cn
EPS Precision Part Inserts That Record Impact by Permanent Compression
You are here: Home » Products » Packaging Lining » EPE » EPS Precision Part Inserts That Record Impact by Permanent Compression
epe foam

loading

epe foam epe foam
epe foam epe foam
High-quality expanded polystyrene offers excellent cushioning properties and is ideal for the customised storage of precision components. High-quality expanded polystyrene offers excellent cushioning properties and is ideal for the customised storage of precision components.
High-quality expanded polystyrene offers excellent cushioning properties and is ideal for the customised storage of precision components. High-quality expanded polystyrene offers excellent cushioning properties and is ideal for the customised storage of precision components.
High-quality expanded polystyrene offers excellent cushioning properties and is ideal for the customised storage of precision components. High-quality expanded polystyrene offers excellent cushioning properties and is ideal for the customised storage of precision components.
High-quality expanded polystyrene offers excellent cushioning properties and is ideal for the customised storage of precision components. High-quality expanded polystyrene offers excellent cushioning properties and is ideal for the customised storage of precision components.

EPS Precision Part Inserts That Record Impact by Permanent Compression

Availability:
Quantity:
Moulded EPS inserts for one way precision shipments, where a permanently crushed cavity is useful evidence: the pack records the event instead of springing back and hiding it.
Product Description

Most cushioning specifications ask a foam to spring back. EPS does the opposite: once its cells crush they stay crushed. For a single trip precision shipment that is useful rather than a defect, because the pack keeps a visible record of a drop or a heavy clamp. A resilient liner can hide the same event by returning to shape before anyone opens the box.

EPS is moulded from expanded polystyrene beads fused by steam in a shaped tool. The closed cell structure is stiff and its compressive strength rises with density. Beyond the yield point the cell walls collapse, absorbing energy in one event, and they do not recover. That is why the insert suits one outward journey or a short loop, not a returnable fleet.

Design starts with part fragility and the drop height the route imposes, not with a stock sheet thickness. Density, wall section, and the area supporting the component set how much crush travel is available before the part bottoms out. Sample inserts go through a drop sequence, with the cavity adjusted so material remains to compress after a first impact.

That permanent set turns receiving inspection into a factual check. A crushed corner, a cavity that no longer holds its part, or a lid that suddenly sits proud can be photographed and logged against the shipment number. The evidence does not quantify the shock, and we do not claim it does; it simply shows that an event occurred and where the load entered the pack.

The part side still has to be engineered. Cavities follow the 3D data, support the component on agreed datum faces, and stay clear of coated or polished surfaces. A static dissipative grade is available for electronic modules. Because EPS can shed beads, inserts for clean assembly areas are supplied with a film facing or a sealed bag so loose particles never travel with the component.

Choosing EPS is therefore a route decision. Where a container cycles hundreds of times, EPP, EPE, or a thermoformed tray is cheaper per trip; where one high value part travels once and the receiving plant wants visible handling evidence, EPS earns its place. It is light, keeps freight cost down, and is marked with the correct material code so disposal follows local rules at destination.

To specify an insert, send the part drawing with weight and fragility data, the drop and stacking requirements, the transport mode, whether the pack is single trip, any static or cleanliness rules, and the destination packaging regulations. We return a proposed density, a cavity drawing, and sample inserts with a drop test record and reference photos of acceptable and unacceptable crush marks.

Product data parameters
Material
Expanded Polyethylene (EPE)
closed-cell
LDPE base
Density
18 – 45 kg/m³ (common: 20 / 25 / 30 / 40)
Thickness
0.5 – 100 mm (custom)
Colour
White
Black
Red
Blue
Green
Custom (Pantone)
Max Sheet Width
up to 1600 mm (std 600 / 1000 / 1200 / 1500)
Hardness
Shore C 15 – 70 (by density)
Tensile Strength
≥ 120 kPa (up to 200–240 kPa)
Compression Recovery
≥ 90% (typ. ≥ 95%)
Water Absorption
≤ 0.1%
Flame Retardant
UL 94 V-2 (optional)
Product Catalogue
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button
Previous: 
Next: 

Quick Links

Product Category

Contact Us

   +86-512-55391251 / +86-18901563989
  zjgfhwm@zjgfenghui.cn
   No. 5 Zhaofeng East Ring Road, Leyu Town, Zhangjiagang City, Jiangsu Province
Copyright © 2023 Zhangjiagang Fenghui logistics equipment Co., Ltd. Supported by Leadong. Sitemap. Privacy Policy.