+86-512-55391251 / +86-18901563989             zjgfhwm@zjgfenghui.cn
EVA Foam Liners Graded by Shore Hardness for Precision Parts
You are here: Home » Products » Packaging Lining » EVA » EVA Foam Liners Graded by Shore Hardness for Precision Parts
Customised EVA foam storage containers are suitable for packaging solutions for all types of precision components

loading

Customised EVA foam storage containers are suitable for packaging solutions for all types of precision components Customised EVA foam storage containers are suitable for packaging solutions for all types of precision components
Customised EVA foam storage containers are suitable for packaging solutions for all types of precision components Customised EVA foam storage containers are suitable for packaging solutions for all types of precision components
Customised EVA foam storage containers are suitable for packaging solutions for all types of precision components Customised EVA foam storage containers are suitable for packaging solutions for all types of precision components
Customised EVA foam storage containers are suitable for packaging solutions for all types of precision components Customised EVA foam storage containers are suitable for packaging solutions for all types of precision components
Customised EVA foam storage containers are suitable for packaging solutions for all types of precision components Customised EVA foam storage containers are suitable for packaging solutions for all types of precision components
Customised EVA foam storage containers are suitable for packaging solutions for all types of precision components Customised EVA foam storage containers are suitable for packaging solutions for all types of precision components

EVA Foam Liners Graded by Shore Hardness for Precision Parts

Availability:
Quantity:
Foam selections usually start with density, but for EVA the more telling question is hardness. Twenty Shore A feels like soft rubber and protects a lacquered face; eighty behaves almost like a structural block. Same polymer, different jobs.
Product Description

Foam selections usually begin with density, but for EVA the more telling question is hardness. Twenty Shore A feels like a soft rubber and protects a lacquered surface; eighty Shore A behaves closer to a structural block. Same polymer, same sheet, entirely different jobs, which is why our EVA quotations are written in hardness grades rather than in thickness alone.

At the soft end, around 20 to 35 Shore A, the foam yields under thumb pressure and recovers without memory. That is the grade for contact faces on finished parts: polished housings, painted covers, display items where even a light scuff is a defect. It grips gently, distributes the load over its whole face and forgives the operator who drops a part in at an angle.

In the middle, roughly 40 to 60 Shore A, the foam holds a position instead of merely padding one. Cavities thermoformed at these grades keep a component where you left it through transport, resist sliding on their own, and still release the part without a fight. Most repeat-pick industrial liners live in this band.

At the firm end, 70 to 90 Shore A, EVA stops being a cushion and becomes a spacer. Blocks and ribs at these grades carry the weight of stacked layers, hold datum faces square and resist being crushed by a lid closing on them. It pairs with a softer grade inside the same case: firm outside for structure, soft inside for the finish.

Hardness is tuned by formulation, and vinyl acetate content is the main lever. Higher VA content shifts the foam softer and more elastic; lower content moves it firmer and more board-like. That is why two sheets of the same density can feel different, and why we specify hardness and density together rather than density alone.

Thermoforming is where EVA earns its contour reputation. The sheet heats and presses into sharp internal corners that bead foams cannot hold, so a cavity follows a housing profile with crisp edges, and the fit reads as bespoke even in modest volumes. Lamination to boards and fabrics runs on the same line, which keeps case builds in one process.

The honest limits sit alongside. EVA takes a permanent set under sustained heavy load, so a case stored fully loaded for a year will show the impression; its service ceiling is around eighty degrees Celsius, below what EPP tolerates; and recycling routes are narrower than for polypropylene. Where a liner faces crushing loads or oven-adjacent duty, we say so and steer the specification to EPP instead.

Where EVA is genuinely the better answer: instrument and device cases, medical sets, tool rolls, premium presentation packaging, and any application where the contact feel is part of the product experience. The hardness range makes one polymer cover all of them.

Give us the part, the finish it must keep and the handling it will see, and the liner proposal arrives with hardness, density and cavity contour stated as measured values, not as a material name.

Product data parameters
Material
China
Ethylene-Vinyl Acetate (EVA) foam
closed-cell
cross-linked
VA Content
5% – 40% by weight
Density
30 – 300 kg/m³
Hardness
Shore A 20 – 90 (or Shore C 10 – 90)
Service Temperature
−40 °C ~ +80 °C
Tensile Strength
2 – 20 MPa
Elongation at Break
100% – 600% (up to 800%)
Compression Set
≤ 35% (22h @ 70 °C)
Water Absorption
< 1% by volume
Flame Retardant
UL 94 HB / V-0 (optional)
Product Catalogue
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button
Previous: 
Next: 

Quick Links

Product Category

Contact Us

   +86-512-55391251 / +86-18901563989
  zjgfhwm@zjgfenghui.cn
   No. 5 Zhaofeng East Ring Road, Leyu Town, Zhangjiagang City, Jiangsu Province
Copyright © 2023 Zhangjiagang Fenghui logistics equipment Co., Ltd. Supported by Leadong. Sitemap. Privacy Policy.