| Availability: | |
|---|---|
| Quantity: | |
Cushioning fails quietly. A liner that feels protective on the packing bench can still let a precision component travel centimetres inside its pocket, because softness alone was never the specification. High-density EVA liners for precision components are engineered the other way round: as calibrated springs, where density, pocket geometry, and compression are chosen so the part holds its position from pack-out to installation.
The starting material is closed-cell, cross-linked EVA, available across a density span of roughly 30 to 300 kg/m³. That range exists for a reason: a 200 g optical fixture and a 5 kg gauge head need completely different foams. Density is selected from the part weight divided by the contact area the pockets provide—not guessed from a sample's feel in the hand.
The calibration target is deflection. A part resting in its pocket should compress the foam beneath it by roughly a quarter of the wall height at static load. That preload is what stops rattle: the walls grip the part lightly in every direction, so road vibration has nothing to amplify. Foam that is too soft bottoms out on the first drop and transfers the impact straight through; foam that is too stiff never grips and lets the part float. Compression set matters here too—grades are specified so the pockets still push back after months compressed in storage.
Pocket layout follows the part's datum logic. Support lands on the faces that matter—the machined base, the calibrated surface—not on cosmetic edges that must stay unmarked. Cutouts are moulded or CNC-cut to the part contour with working tolerances, finger recesses let operators lift parts out without prying, and colour contrast between liner and part makes a missing component obvious at a glance.
Environmental behaviour is part of the specification. Closed-cell EVA absorbs under one percent of water by volume, keeps its properties across temperatures from freezing warehouses to sun-heated trucks, resists oils and cleaning agents, and is available in flame-retardant grades where the application demands them. The dense black surface that gives these liners their professional look also hides scuffs through years of handling.
Laminated onto hollow-board panels or fitted inside returnable crates, the same liner becomes the working interior of a transport system: the box takes the loads, the calibrated foam takes the vibration. Because the liner is a replaceable element, a change of part family means swapping foam—not retiring the container.
To have a liner calibrated properly, send the part weight, overall geometry, and its sensitive surfaces. The response should be a density recommendation, a deflection calculation, and a pocket layout—numbers first, foam second.