+86-512-55391251 / +86-18901563989             zjgfhwm@zjgfenghui.cn
HP Parts Crates Managed for Cleanliness And Contamination Control
You are here: Home » Products » Standard Plastic Packaging » HP Box » HP Parts Crates Managed for Cleanliness And Contamination Control
Plastic HP Box

loading

Plastic HP Box Plastic HP Box
Plastic HP Box Plastic HP Box
Plastic HP Box Plastic HP Box
Plastic HP Box Plastic HP Box
Plastic HP Box Plastic HP Box
Plastic HP Box Plastic HP Box

HP Parts Crates Managed for Cleanliness And Contamination Control

Availability:
Quantity:
HP crates treated as a possible contamination source and controlled accordingly: trimmed edges, clean packing, declared virgin material, and batch records that follow every container.
Product Description

Where incoming inspection is strict, the container is inspected too. A crate can arrive structurally perfect and still be rejected because a sliver of flash, a loose plastic chip, or an unexplained mark travelled with the parts. Cleanliness is therefore a property of the packaging process, not a claim about the material, and it has to be managed from the mould to the moment the box is opened on the line.

The first source is the crate itself. Injection moulding leaves flash at parting lines, trimming leaves edges that can shed, and repeated handling abrades sharp corners into fine particles. Tool maintenance, generous radii, and controlled de-flashing remove the obvious material; a final blow-down and visual check remove what remains. Design helps as well: smooth internal corners, no pockets that trap swarf, and no exposed rib ends an operator could scrape against.

Material purity is the second line. Virgin high-impact polypropylene with no regrind avoids the black specks and inconsistent behaviour that recycled content can introduce, and declared colour masterbatches keep the same appearance across batches. The polymer resists the oils, acids, alkalis, and cleaning agents a parts route exposes it to, and absorbs almost no water, so a wiped surface stays dry instead of holding residue.

Clean packing is the third. Boxes are finished, cleaned, and dried before they are stacked for shipment, then enclosed so transit dust and handling grime cannot undo the work. Processing and packing areas are kept separate, and returnable crates re-entering the loop go through the same cleaning and inspection as new ones. A container that has been in service is judged by the same standard as one leaving the mould.

Identification keeps the system honest. Crates are coded by part family or zone so a box from one programme cannot quietly be used for another, and each production batch carries an identifier linking it to a material lot, a tool, and an inspection record. When a question is raised weeks later, the trail exists rather than being reconstructed from memory.

In daily circulation the same features pay back twice: rounded interiors wipe clean in one pass, non-absorbent walls do not hold yesterday's contamination, and a visible wear criterion—a cracked corner, a whitened edge, a surface beginning to shed—tells the store exactly when a crate leaves the fleet. Optional lids and anti-static grades cover parts that need them.

To align with a customer's cleanliness rules, provide the incoming inspection criteria, any particle or residue limits, the cleaning agents in use, and the traceability fields required. A credible response is a control plan covering trimming, cleaning, packing, batch records, and retirement—so the crate is as clean as the parts it carries, and can be shown to be.

Parameters
Material
PP
Place of origin
China
Weight
Standard weight / Customisable
Load-bearing capacity
35kg
Stacking
Yes
Recycling
Yes
Stiffener
Yes
Lid
In accordance with the client’s requirements
Adaptability
Resistant to high and low temperatures
Waterproof
Yes
Anti-static
Can be customised
Product Catalogue
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button
Previous: 
Next: 

Quick Links

Product Category

Contact Us

   +86-512-55391251 / +86-18901563989
  zjgfhwm@zjgfenghui.cn
   No. 5 Zhaofeng East Ring Road, Leyu Town, Zhangjiagang City, Jiangsu Province
Copyright © 2023 Zhangjiagang Fenghui logistics equipment Co., Ltd. Supported by Leadong. Sitemap. Privacy Policy.