| Availability: | |
|---|---|
| Quantity: | |
A parts storage box on a European assembly line is judged less by how much it holds than by how clearly it speaks. In a two bin kanban loop the empty bin is the order: an operator finishes the front box, slides it back, and the supermarket sends a new one. A box that hides its empty state, or does not fit the rack module, breaks the signal.
The rack module comes first. Outer footprint, height with lid, and stack locator are matched to the shelf pitch and the picking face, so a bin sits square on the beam and its label faces the aisle. Colour and a moulded part number field identify the family at a distance. Sizes follow one series, so a shelf reconfigures by moving bins, not rebuilding racks.
Two bins share one location. The front bin serves the pick; when it empties, the rear bin slides forward and the empty one goes to the return lane. An open top with a low pick face, a coloured rim visible from the aisle, and a rim step that stops a half filled bin being read as full keep the change unmistakable. The pair stays together in the loop.
Flow discipline sits on small details. Bins pick from one direction, so parts enter the same way they leave and first in first out holds without training. A batch card slot at the end face carries the lot number, and a thin divider or layer pad separates an opened batch from a fresh one. Nothing in the bin needs reading twice.
Handling follows the plant, not the catalogue. Grip openings suit gloved hands at pick height, the base accepts roller conveyors and AGV decks, and the stack locator caps the column at the agreed height. Empties nest to a fraction of the filled volume, and lids close without tools so the return trip carries parts or collapses flat.
The loop needs a housekeeping rule. Bins wash on a fixed cycle with the agents the plant uses, cracks and worn locators are the retirement signs, and a bin that loses its colour rim loses its signal and goes out of service. A spare stock of bins covers washing and repairs, and new bins join only as matched pairs so the loop keeps its count.
To set up a loop, send the part list with pick quantities and batch sizes, the rack or shelf module, pick height and reach direction, conveyor or AGV interface, label and kanban card format, cleaning agents, temperature range, and target cycles. We return a bin series sized to the rack, a two bin layout drawing, and samples trialled at a line side location.