+86-512-55391251 / +86-18901563989             zjgfhwm@zjgfenghui.cn
White EPE Cushioning Pads Built As A Modular Storage System
You are here: Home » Products » Packaging Lining » EPE » White EPE Cushioning Pads Built As A Modular Storage System
EPE foam

loading

EPE foam EPE foam
EPE foam EPE foam
EPE foam EPE foam
EPE foam EPE foam
EPE foam EPE foam

loading

White EPE Cushioning Pads Built As A Modular Storage System

Availability:
Quantity:
A modular system of white EPE cushioning pads: standard thicknesses and formats cut to consistent tolerances, combined to protect many part numbers without a dedicated cavity for each one.
Product Description

When a store holds dozens of similar brackets, housings, and trim pieces, giving every part number its own machined cavity is often the expensive answer. The parts differ by millimetres, the volumes are modest, and a shelf of bespoke inserts ends up obsolete the moment a drawing is revised. A modular cushioning pad system takes the opposite route: a small family of white EPE pads, cut to a standard, combined differently for each box.

The system is built from formats rather than from individual part drawings. Layer pads separate tiers, corner protectors guard the contact points, divider strips create compartments, U-channels line a box wall, and flat base pads take the load. Sheet from half a millimetre to a hundred millimetres can be laminated to the thickness a tier needs, and densities from 18 to 45 kg/m³ are stocked by weight class—so a heavier casting and a light sensor module draw from the same pad library.

CNC machining still matters here, but its job is consistency rather than one-off geometry. The router cuts every pad in a batch to the same dimensions, adds finger recesses, locally thinned sections, or engraved part numbers where they help, and holds tolerances tight enough that pads stack flat and seat squarely in a crate. A replacement pad from next year's batch fits exactly where the old one did.

White is a working choice, not a default. On a pale surface, metal swarf, oil mist, and handling grime show immediately, so a store can see when a pad needs cleaning or retirement instead of discovering it on a part. White also carries no pigment that could transfer onto light-coloured or painted components, and it stays neutral alongside the coloured labels used for zone coding.

Storage duty shapes the specification. Pads sit under a static stack for weeks, return over ninety percent of their thickness after compression—typically above ninety-five—and absorb under a tenth of a percent water, so humidity in a warehouse never turns into moisture against a metal part. Inspection is simple: a pad with a permanent dent or a compressed edge has reached the end of its service and is replaced from stock.

The economics favour breadth. One pad library covers many part numbers, there is no cavity design charge for each new component, and a model change means recombining pads rather than scrapping inserts. Spare inventory is a handful of standard sizes, not a catalogue of unique shapes.

To configure a set, send the internal dimensions of the boxes in use, the range of part weights, and the stack heights in the racks. The reply should be a short pad schedule—formats, thicknesses, densities, and quantities—that a store can order, stock, and recombine on its own.

Product data parameters
Material
Expanded Polyethylene (EPE)
closed-cell
LDPE base
Density
18 – 45 kg/m³ (common: 20 / 25 / 30 / 40)
Thickness
0.5 – 100 mm (custom)
Colour
White
Black
Red
Blue
Green
Custom (Pantone)
Max Sheet Width
up to 1600 mm (std 600 / 1000 / 1200 / 1500)
Hardness
Shore C 15 – 70 (by density)
Tensile Strength
≥ 120 kPa (up to 200–240 kPa)
Compression Recovery
≥ 90% (typ. ≥ 95%)
Water Absorption
≤ 0.1%
Flame Retardant
UL 94 V-2 (optional)
Product Catalogue
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button
Previous: 
Next: 

Quick Links

Product Category

Contact Us

   +86-512-55391251 / +86-18901563989
  zjgfhwm@zjgfenghui.cn
   No. 5 Zhaofeng East Ring Road, Leyu Town, Zhangjiagang City, Jiangsu Province
Copyright © 2023 Zhangjiagang Fenghui logistics equipment Co., Ltd. Supported by Leadong. Sitemap. Privacy Policy.