| Quantity: | |
|---|---|
Why Choose Our Dust-Proof Cloth Bags?
|  |
|
PET (Polyethylene Terephthalate): Provides high optical clarity, mechanical strength, and recyclability per ISO 15270. Recognized as the industry-standard material for electronics, cosmetics, and food-contact packaging under FDA 21 CFR §177.1630 and EU No 10/2011.
PVC (Polyvinyl Chloride): Offers cost efficiency and excellent heat-sealability; however, its use is increasingly restricted in multiple jurisdictions due to evolving environmental regulations (e.g., EU PPWR, REACH Annex XVII) and corporate sustainability commitments.
PS (Polystyrene): Lightweight and readily thermoformable, but inherently brittle. Commonly used for single-use foodware, low-cost trays, and flocked liner applications where impact resistance is not critical.
PP (Polypropylene): Demonstrates superior resistance to heat (up to 120°C), chemicals, and moisture vapor transmission. Preferred for microwavable containers (compliant with FDA 21 CFR §177.1520), medical device packaging (ISO 10993 biocompatibility), and demanding industrial environments.
Modified Variants: Engineered with ESD additives (per ANSI/ESD S20.20), conductive fillers, or flocked surfaces to meet specific functional, safety, or aesthetic requirements validated through application-specific testing
Blister trays are lightweight, cost-efficient, and customizable packaging solutions providing rapid production turnaround, consistent cushioning performance (validated per ISTA/ASTM), and high optical clarity. Available in configurations compliant with ESD control (ANSI/ESD S20.20), thermal resistance (up to specified limits), and food-contact regulations (FDA 21 CFR/EU No 10/2011), they enable optimized trade-offs between functional requirements, environmental considerations, and economic efficiency across regulated and commercial sectors. |
|
| Thermoformed trays offer moderate strength but are prone to abrasion, ESD (unless controlled), and limited heat resistance (except validated PP). Key considerations: (1) PVC restrictions (EU PPWR/REACH/EPR); (2) high tooling costs below [X] units requiring volume assessment; (3) recycling dependent on local infrastructure needing region-specific EOL validation. |
 | This photo captures our company's group photo with esteemed Indonesian guests at the prestigious 2025 Indonesia Industrial Exhibition, where we had the honor of showcasing our products and services. |  |
