+86-512-55391251 / +86-18901563989             zjgfhwm@zjgfenghui.cn
PP Thermoformed Liners Designed Around Wall Thickness and Draft Angles
You are here: Home » Products » Packaging Lining » Vacuum-formed packaging » PP Thermoformed Liners Designed Around Wall Thickness and Draft Angles
blister tray

loading

blister tray blister tray
blister tray blister tray
blister tray blister tray
blister tray blister tray
blister tray blister tray
blister tray blister tray

PP Thermoformed Liners Designed Around Wall Thickness and Draft Angles

Availability:
Quantity:
PP thermoformed liners engineered backwards from what the sheet can actually do: even wall thickness, workable draft, generous radii, and trimmed flanges that nest without jamming.
Product Description

A cavity that looks right on a drawing can fail on the forming machine. Heated PP sheet stretches over a tool, and the deepest corners always end up thinner than the flange. A liner specified by part shape alone may arrive soft at the base, cracked at a radius, or too weak to carry a stack. We design backwards from what the sheet can actually do.

Draw ratio comes first: cavity depth against opening width sets how far the sheet travels. Beyond a workable ratio the bottom thins sharply, so we measure a trial tray at the base and corners and set a stated minimum. Where a part is genuinely deep, we widen the mouth, add a lead in ramp, or split the depth across two stacked trays.

Draft and radii come next. Vertical walls grip the tool and mark the part, so every cavity gets a release angle sized to the sheet and a generous bottom radius that also spreads load. Those two choices double as locating features: a part settles into one position by geometry alone, and an operator can see immediately when it has not seated correctly.

Tooling follows the volume. A resin tool serves the prototype and fit check; a machined aluminium tool with controlled vacuum holes holds tolerance over a production run. Hole marks are placed away from part contact faces, and the flange is trimmed to a width that supports the tray inside the crate without blocking the lid. Cut edges are deburred.

Material grade is chosen against the route, not the catalogue. Impact modified copolymer PP keeps its toughness in cold stores, a static dissipative grade covers electronic modules, and virgin sheet avoids the black specks of regrind on visible surfaces. PP resists the oils and cleaning agents a parts loop uses and absorbs almost no water, so a washed liner dries quickly and returns to service.

Empty trays must separate as easily as full ones locate. The release angle that frees a part also stops a stack wedging together, and a small flange step keeps a controlled gap between trays. Cracked lips, whitened corners, and pockets that no longer hold a part are the retirement signs; the liner is cheap enough to replace before it damages anything.

To quote, send the part drawing or 3D data, surface finish requirements, quantity per box, the crate inner dimensions, stacked layer count, cleaning agents, target cycles, and annual volume. We return a wall thickness map, a tool proposal, and prototype trays for a fit and transit trial. Forming limits then become a checked specification, not a surprise at first delivery. That record travels with the tool for repeat orders.

Product data parameters
Material
PP
PVC
PET
Place of origin
China
Process
Design – Prototyping – Mass Production – After-sales Service
Customisation
Fits the shape of the product and conforms to the internal dimensions of the container
Frost- and heat-resistant
Yes
Free design
Yes
Free samples
Yes
Anti-static
Can be customised
Specifications
Tailored to your requirements
Lid
In accordance with the client’s requirements
Adaptability
Resistant to high and low temperatures
Product Catalogue
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button
Previous: 
Next: 

Quick Links

Product Category

Contact Us

   +86-512-55391251 / +86-18901563989
  zjgfhwm@zjgfenghui.cn
   No. 5 Zhaofeng East Ring Road, Leyu Town, Zhangjiagang City, Jiangsu Province
Copyright © 2023 Zhangjiagang Fenghui logistics equipment Co., Ltd. Supported by Leadong. Sitemap. Privacy Policy.