| Availability: | |
|---|---|
| Quantity: | |
A thin thermoformed tray does not become stackable by accident, and the two things a store asks of it pull in opposite directions. Full trays must sit in a stable column with every part untouched by the weight above. Empty trays must nest tightly so the return leg does not ship air. Designing both into one formed shape is the real work behind a stackable liner.
The load path comes first. When trays are stacked, the weight of each loaded layer has to travel through the tray structure itself—rims, corner posts, and stacking lugs—down to the edge of the tray below. It must never pass through a component or a cavity floor. Lugs are positioned over supporting ribs, with a positive seat that stops one tray from sliding on the next, and a small rotation or offset feature so a misaligned stack is obvious before it grows.
Clearance above the parts is specified with the same care. The underside of the tray above sits above the tallest component in the tray below, with margin for a tolerance-high part and for the slight sag a warm workshop can produce. A stack height rating follows from the per-layer weight and long-term behaviour of the sheet, so a column held in storage for weeks is rated below one that is merely moved across a bay.
Nesting is the counterweight. A wall steep enough to release from the mould and deep enough to hold a part also wants to wedge into the next tray; too much draft and too little shoulder, and empties jam into a solid block nobody can separate. Stepped sidewalls, controlled draft, and anti-locking shoulders set a defined nesting depth—close enough to save volume, shallow enough that a gloved hand can pull the stack apart.
Sorted storage adds an information layer. Trays are assigned by part number, batch, or destination station, with colour coding, moulded-in numbering, and label windows facing outward so a picker can read a layer without unstacking the column. First-in-first-out rotation becomes a visual habit rather than a system instruction.
In daily use, the same features are the wear indicators. Stress whitening at a lug, a rim that no longer seats flat, or a cavity that has taken a permanent set means the tray leaves the fleet; a damaged tray in the middle of a column is the one that starts a collapse. Trays also drop into the clear internal size of their outer crate with positive location, so the column cannot wander in transit.
To specify a set, give the part weight and count per layer, the intended stack height, the store's dwell time, and the internal dimensions of the outer box. A workable design returns the lug layout, the interlayer clearance, the nesting ratio, and a load rating—so full trays protect the parts and empty trays protect the transport budget.