| Quantity: | |
|---|---|
plastic
TOYOE
The surface of the box is preset with a standardized white marking area, integrating a laser engraving customer coding system and a multi-dimensional specification parameter matrix (Figure 2 shows the full view of the top cover and tray structure).
 |  |  |
The core box body construction adopts a modular PP honeycomb core material solution (Figure 4 shows a close-up of the raw material board). Through an intelligent cutting system, the processing of cross-sized plates ranging from 0.5 to 2 meters is achieved. The honeycomb density is topologically optimized, reducing the box body weight by 30% while increasing the compressive strength by 45%. |
|
| All components must pass three stages of quality verification before leaving the factory: the first stage involves a 48-hour constant temperature and humidity environment test; the second stage involves a full-box drop simulation test; and the final stage involves completing a dynamic load cycle test (including a 1.5 times rated load impact test). |
 | The picture shows a group photo of our company with Indonesian guests at the 2025 Indonesia Industrial Exhibition |  |
The surface of the box is preset with a standardized white marking area, integrating a laser engraving customer coding system and a multi-dimensional specification parameter matrix (Figure 2 shows the full view of the top cover and tray structure).
| | |
The core box body construction adopts a modular PP honeycomb core material solution (Figure 4 shows a close-up of the raw material board). Through an intelligent cutting system, the processing of cross-sized plates ranging from 0.5 to 2 meters is achieved. The honeycomb density is topologically optimized, reducing the box body weight by 30% while increasing the compressive strength by 45%. |
|
| All components must pass three stages of quality verification before leaving the factory: the first stage involves a 48-hour constant temperature and humidity environment test; the second stage involves a full-box drop simulation test; and the final stage involves completing a dynamic load cycle test (including a 1.5 times rated load impact test). |
| The picture shows a group photo of our company with Indonesian guests at the 2025 Indonesia Industrial Exhibition | |
